Fingerprint Readers

Filter Products Showing all 53 results
Categories
Manufacturers
Price Range
Sort By
Card reader
  • BM5510

    Aratek BM5510

    350.00

    Aratek’s BM5510 is a hand-held smart terminal for mobile fingerprints and faces capture.

    The device is equipped with an optical fingerprint reader for scanning single fingers and 5 MP rear camera for face or barcode capture.

    According to the manufacturer, the device has wireless communication support, which includes 2G/3G networks, Wi-Fi and Bluetooth, as well as GPS navigation. The manufacturer also specifies that the terminal has IP54 dustproof and waterproof casing.

    BM5510 is provided with pre-installed Android OS and allows to run custom applications.

  • BM7500

    Aratek BM7500

    400.00

    Aratek’s BM7500 is a hand-held smart terminal for mobile fingerprints and faces capture.

    The device is equipped with an optical fingerprint reader for scanning single fingers, 2 MP front camera and 8 MP rear camera for face or barcode capture.

    According to the manufacturer, the device has wireless communication support, which includes 2G/3G networks, Wi-Fi and Bluetooth, as well as GPS navigation. The manufacturer also specifies that the terminal has IP54 dustproof and waterproof casing.

    BM7500 is provided with pre-installed Android OS and allows to run custom applications.

  • Bio Palm

    BioID BioPalm

    2,700.00

    BioID Technologies’ BioPalm is the compact and lightest livescan system and fully complaint with FBI’S IAFIS Appendix F specification in the industry for forensic analysis, kiosk integration and suspect enrollment.

    The BioPalm device employs the most advanced optical technology and dedicated special light source that enable users to obtain the highest quality images including flats, rolls, slaps, palm and writer’s prints. The BioPalm is absolutely your logical choice for government and law enforcement agencies handling criminal bookings, forensic applications and background check submissions, etc.

  • Bio Slap

    BioID BioSlap

    800.00

    BioID Technologies’ BioSlap is the compact ten-print livescan device FBI’s IAFIS Appendix F certified and designed to capture four finger slaps, two thumbs or rolled finger simultaneously.

    The BioSlap employs the most advanced optical technology and dedicated special light source that allow high speed print image capturing and seamless image processing, which ensure the best image quality for slap prints as well as for rolled fingerprints.

    The BioSlap is absolutely your ideal choice for all your civil or criminal identification applications such as voter registration, national ID issuance, applicant background checks, etc.

  • Credence Two

    Credence ID CredenceTWO

    1,150.00

    CredenceTWO™ features the most advanced enrollment quality fingerprint sensor combined with state of the art smart card reading, paired with a 5-inch HD display running Android 7.1 (Nougat).

    The platform features the award-winning Credence single board computer (SBC), an integrated FAP 30 FBI PIV certified fingerprint sensor, a 5 MP optical camera with dual LED illumination for barcode and QR code reading.

  • Credence Trident

    Credence ID Trident

    2,250.00

    Credence ID’s Trident is a hand-held device, which is capable to capture single or dual fingerprints, face images and single or dual iris images.

    According to the manufacturer, the device is based on a FIPS-201 / PIV and Appendix F Mobile ID FAP 45 certified certified fingerprint sensor.

    The Trident device is provided with pre-installed Android OS and allows to run custom applications. The device features high capacity battery and supports multiple wireless connectivity options.

  • Guardian USB

    Cross Match Guardian USB

    3,800.00

    The Cross Match Guardian USB and FW are part of optical fingerprint scanners family intended for fast capture of all 10 fingerprints. The scanners are certified by FBI for both civil ID flats and full criminal ten-print flats. Scanners image quality complies with FBI’s IAFIS Appendix F specification.

    These Guardian scanners are available as different models with high-speed USB 2.0 or IEEE 1394 (FireWire) interfaces, and options for rolled or flat-only fingerprints capture.

  • Patrol

    Cross Match Patrol

    2,000.00

    The Cross Match Patrol and Patrol ID fingerprint readers are designed for quick fingerprint capture in various conditions. Both scanners are certified by FBI for both civil ID flats and full criminal ten-print flats. Scanners image quality complies with FBI’s IAFIS Appendix F specification.

    The Patrol ID reader is able to capture only flat fingerprints: four-finger slaps, dual thumbs or single flats.

    The Patrol reader is a more complex model that is able to capture both rolled and flat fingerprints.

  • Patrol

    Cross Match Patrol ID

    1,800.00

    The Cross Match Patrol ID is designed for quick fingerprint capture in areas ranging from small offices to large public areas. The scanner is certified by FBI for as IAFIS IQS Appendix F compliant for civil ID flats for applicants.

    The Patrol ID can quickly capture all ten fingerprints as two four-finger slaps and dual thumbs.

    The fingerprint reader is suitable for using in various areas and applications as it is compact and powered from active USB hub. The device has IP54 rugged casing meaning that it is protected enough from dust and splashing water.

  • EikonTouch 510

    DigitalPersona EikonTouch 510

    75.00

    EikonTouch 510 from DigitalPersona is a capacitive fingerprint reader. The reader is based on TCS1C fingerprint sensor.

    The manufacturer specifies that the device has SteelCoat coating, which can withstand more than 4 million touches. Also specified the rugged IP63 – rated casing, meaning that the device is sealed from contact with dust and withstands spraying water.

  • EikonTouch 710

    DigitalPersona EikonTouch 710

    95.00

    EikonTouch 710 from DigitalPersona is a PIV (FIPS 201) certified fingerprint reader, based on TCS1C capacitive sensor.

    The manufacturer specifies that the device has SteelCoat coating, which can withstand more than 2 million touches. Also specified the rugged IP63-rated casing, meaning that the device is sealed from contact with dust and withstands spraying water.

  • U.are.U 4500

    DigitalPersona U.are.U 4500

    79.00

    The DigitalPersona U.are.U 4500 Fingerprint Reader is an optical USB 2.0 fingerprint scanner suitable for most users in common or shared computer environments. The reader is easy to install and use. U.are.U 4500 accommodates the widest range of fingerprint and skin conditions.

    An OEM module version is also available.

  • U.are.U 4500 OEM Module

    DigitalPersona U.are.U 4500 OEM Module

    79.00

    The U.are.U 4500 Module is intended for integration into devices like PC keyboards, POS terminals or kiosks, entry and/or attendance control devices, etc. Technically the module is an OEM version of optical U.are.U 4500 fingerprint reader without metal case.

    The module is sealed from dust and designed to be easily mounted into various hardware. U.are.U 4500 module is available in standard and small footprint form factors.

  • FS10

    Futronic FS10

    99.00

    Futronic FS10 is a PIV-certified fingeprint reader. Scanner features large 1″ x 1″ platen which makes it suitable for AFIS applications.

    FS10 is certified by the FBI as compliant with PIV-071006 Image Quality Specifications. The reader is also listed in US GSA FIPS 201 Approved Product List, which enables it to be used in government systems and applications.

    The scanner uses infra-red illumination for single flat fingerprints capture.

  • FS26

    Futronic FS26

    123.00

    Futronic’s FS26 USB2.0 Fingerprint Mifare Card Reader/Writer combines a fingerprint scanner and an ISO14443A compatible MIFARE card reader/writer into one device.

    Live Finger Detection (LFD) is built in into FS26. The LFD allows to reject fake fingers made from silicone rubber, play-doh or other materials.

    The fingerprint and MIFARE card readers can be used together for two-factor authentication. A fingerprint template is stored on the card and can be compared with a fingerprint scanned with the fingerprint scanner. Also the fingerprint reader and MIFARE card reader can be used separately.

  • FS28

    Futronic FS28

    292.00

    Futronic FS28 is an autonomous fingerprint scanner. The scanner uses Bluetooth interface for connecting with a host device, like PC, tablet or smart phone. FS28 can also be connected to the host via USB port.

    FS28 fingerprint reader was certified by the FBI as PIV-071006 / FIPS-201 compliant, making it suitable for using in U.S. government systems. It can be also used for various applications like field usage by law enforcement officers, attendance check in remote locations etc.

    The device features a built-in LCD screen with 128 x 64 pixel resolution. There are also four buttons for operating the device. The device can report its status via red/blue LED or buzzer.

  • FS50

    Futronic FS50

    273.00

    FS50 fingerprint scanner is intended for professional applications. The scanner features large platen area (1.6″ x 1.5″) that allows to scan single or dual flat fingerprints, or single rolled fingerprint.

    The FS50 was certified by FBI to be compliant with PIV-071006 Image Quality Specification for Single Finger Reader. The scanner is also listed in the US General Services Administration (GSA) FIPS 201 Evaluation Program Approved Product List. The FS50 meets the US Federal Information Processing Standard 201 (FIPS 201) for Personal Identification Verification (PIV) of Federal Employees and Contractors.

  • FS51 OEM module

    Futronic FS51 OEM module

    270.00

    Technically the FS51 module is an FS50 scanner without plastic case and USB cable. The module is intended for customers who want to integrate rolled or single/dual flat fingerprint scanner into their own hardware like handheld ID verification machine, portable voter registration station, etc.

    The FS51 is FIPS 201 / PIV compliant device and is listed in the US General Services Administration (GSA) FIPS 201 Evaluation Program Approved Product List. The scanner features large platen area (1.6″ x 1.5″) that allows to scan single or dual flat fingerprints, or single rolled fingerprint.

  • FS64

    Futronic FS64

    999.00

    The FS64 ID Flat Fingerprint Scanner from Futronic is an FBI certified (Appendix F) fingerprint reader. The scanner captures four-finger slaps, dual thumbs, as well as single rolled and flat fingerprints.

    The manufacturer specifies that the scanner features IP54 casing meaning that its internals are protected against dust, physical contact and water projected by a nozzle. The enforced construction consists of ABS outer shell and internal frame from aluminium alloy. The device is fully powered via USB and does not require external power supply.

  • FS80H

    Futronic FS80H

    60.00

    Futronic’s FS80H USB 2.0 Fingerprint Scanner is based on CMOS sensor technology and precise optical system that allow to capture high quality fingerprint images almost without distortions.

    Problematic fingerprints (wet, dry or blurred) can be reliably scanned with FS80H as it uses infra-red LEDs for finger illumination. Image quality optimization is obtained by automatical adjustment of illumination intensity for each finger.

    Live Finger Detection (LFD) is performed by a separate electronic circuit build into FS80H. This feature allows to reject fake fingers made from silicone rubber, play-doh or other materials. The LFD can be optionally enabled from user application.

  • FS81 OEM module

    Futronic FS81 OEM module

    60.00

    Futronic FS81 is an OEM module version of FS80 fingerprint scanner. The module includes a CMOS sensor with precise optical system for fingerprint capture. The optical system allows to capture fingerprint images without any distortions.

    Problematic fingerprints (wet, dry or blurred) can be reliably scanned with the module as it uses infra-red LEDs for finger illumination. Image quality optimization is obtained by automatical adjustment of illumination intensity for each finger.

    FS81 module has rugged sensor with a crown glass scanning window (14 mm thickness).

  • FS82

    Futronic FS82

    83.00

    Futronic’s FS82 USB 2.0 Fingerprint Smart Card Scanner is a combination of FS80H fingerprint scanner hardware and ISO7816 smart card reader.

    The fingerprint and smart card readers can be used together for two-factor authentication. A fingerprint template is stored on smart card and can be compared with a fingerprint scanned with the fingerprint scanner. Also the fingerprint reader and smartcard reader can be used separately.

    The fingerprint reader part features precise optics and infra-red illumination that allow to scan wet, dry, blurred and other problematic fingerprints reliably.

  • FS83 module (sFAM)

    Futronic FS83 module (sFAM)

    87.00

    Futronic FS83 serial Fingerprint Authentication Module (sFAM) is suitable for using as a remote scanner or as an embedded module.

    The module can be embedded into access control device, point of sales machine, electronic safe or other similar device. 4 wires serial interface allows to control the module from any host computer. The manufacturer specifies that the module itself is also able to store and recognize fingerprint templates thus it can be used as an embedded fingerprint recognition device.

    Note, that power adapter or power supply are not included with sFAM.

  • FS84 module (eFAM)

    Futronic FS84 module (eFAM)

    103.00

    Futronic FS84 ethernet Fingerprint Authentication Module (eFAM) is suitable for using as a remote scanner or as an embedded module.

    The module can be controlled by any host system via Ethernet (TCP/IP). 4 wires serial interface is also available. The manufacturer specifies that the module itself is also able to store and recognize fingerprint templates thus it can be used as an embedded fingerprint recognition device.

    The module is able to control an external relay via an output channel. Also it can read information via 2 input channels from external sources like door sensor or switch.

  • FS88 OEM module (FS89)

    Futronic FS88 OEM module (FS89)

    80.00

    Technically the FS88 module is an FS88H scanner without plastic case and USB cable. The module is intended for customers who want to integrate FS88 into their own products, like handheld POS devices or portable voter registration stations.

    The FS88 scanner is FIPS 201 / PIV compliant device and is listed in the US General Services Administration (GSA) FIPS 201 Evaluation Program Approved Product List. The FS88 sensor is rugged enough to be used in mobile solutions that may require heavy user interaction in various environments.

  • FS88H

    Futronic FS88H

    80.00

    Futronic’s FS88H is an enhanced version of FS80H fingerprint scanner. The FS88H was certified by FBI to be compliant with PIV-071006 Image Quality Specification for Single Finger Reader. The scanner is also listed in the US General Services Administration (GSA) FIPS 201 Evaluation Program Approved Product List. The FS88H meets the US Federal Information Processing Standard 201 (FIPS 201) for Personal Identification Verification (PIV) of Federal Employees and Contractors.

    The scanner is suitable for high-traffic applications like border control, identity card, driver license, election or any other type of civilian AFIS, as it is able to capture high quality fingerprint images almost without distortions and has a rugged sensor.

  • DactyID 20

    Green Bit DactyID 20

    80.00

    DactyID20 from Green Bit is a FAP ID 20 PIV-certified single fingerprint reader. The manufacturer specifies that the scanner features hardware-based fake finger detection. Also specified that the device has IP54 rating An OEM module is also available from the manufacturer.

  • DactyScan 26i

    Green Bit DactyScan 26i

    350.00

    The DactyScan26i is the most compact 1” x 1” fingerprint scanner on the market today. Its 10 3-color led based graphical user interface facilitates the acquisition process.

    Thus it allows for integration in a wide range of applications: civil identification, e-id document issuing, border control and other public authority related applications.

  • DactyScan 40i

    Green Bit DactyScan 40i

    450.00

    The DactyScan40i from Green Bit is an optical fingerprint reader that is able to capture dual flat fingerprints and single rolled or flat fingerprints. The scanner is certified by FBI as IAFIS IQS Appendix F and PIV compliant.

    The manufacturer specifies that the scanner is compact, has low power consumption from USB port, and thus is suitable for high-traffic mobile ID solutions, like border control, on-the-road identification, passport issuance etc. The device has also 10 LEDs (one for each finger) for more convenient capture of all 10 fingerprints from a person.

  • DactyScan 84c

    Green Bit DactyScan 84c

    900.00

    DactyScan84c from Green Bit is an optical live fingerprint reader with large platen. The reader is capable to capture 4-slap and 2-thumbs fingerprints, allowing to collect all 10 fingerprints using 4+4+2 method. Also the DactyScan84c can capture single rolled and flat fingerprints.

    The device is certified by FBI as compliant with FBI IAFIS IQS CJIS-RS-0010 (V7) Appendix F. Also it is compliant with ANSI/NIST-ITL-1-2007, ANSI/NIST-ITL-1-2000 and ISO/IEC 19794-4 standards.

  • MultiScan 527

    Green Bit MultiScan 527

    3,200.00

    MultiScan527 from Green Bit is an optical palm print and fingerprint reader. The scanner is able to acquire half-palm images (upper and lower), four-finger slaps, dual thumbs, as well as single rolled and flat fingerprints.

    The device is certified by the FBI as compliant with FBI IAFIS IQS CJIS-RS-0010 (V7) Appendix F and is also compliant with Appendix P requirements.

    The manufacturer specifies, that the MultiScan527 can be optionally equipped with additional accessories like smart card / NFC reader, foot pedal etc. Also, an OEM scanner module is available for embedding into custom solutions.

  • Columbo

    Integrated Biometrics Columbo

    150.00

    Integrated Biometrics’ Columbo is a single fingerprint reader designed for desktop applications. It is certified as PIV / FIPS 201 and FBI Appendix F FAP 30 compliant fingerprint scanner.

    The scanner is based on proprietary LES (Light Emitting Sensor) technology, which ensures high-quality fingerprint scanning even when dirty, dry or rough fingers are scanned.

    The manufacturer specifies that the device has IP54 Ingress protection, meaning that it is protected from dust and splashing water.

  • Curve

    Integrated Biometrics Curve

    93.00

    Integrated Biometrics Curve fingerprint reader is based on a proprietary LES Film imaging technology.

    The LES (Light Emitting Sensor) technology is based on multi-layer fingerprint scanning. Sensor’s external layers read a finger. A luminescent layer then produces a preliminary fingerprint image that is scanned by an optical sensor. The resulting image has high quality even when dirty, dry or rough fingers are scanned.

  • Kojak

    Integrated Biometrics Kojak

    1,400.00

    The Kojak is a compact ten-finger biometric scanner which is manufactured by Integrated Biometrics.

    The reader is based on proprietary LES (Light Emitting Sensor) technology, which ensures high-quality fingerprint scanning even when dirty, dry or rough fingers are scanned. The large platen allows to capture four-print slaps, dual thumbs and single flats. Also, the scanner can capture rolled fingerprints.

    The manufacturer specifies that the device has low power consumption and light weight, which make it suitable for mobile applications.

  • Kojak PL

    Integrated Biometrics Kojak PL

    950.00

    The Kojak is a compact ten-finger biometric scanner which is manufactured by Integrated Biometrics.

    The reader is based on proprietary LES (Light Emitting Sensor) technology, which ensures high-quality fingerprint scanning even when dirty, dry or rough fingers are scanned. The large platen allows to capture four-print slaps, dual thumbs and single flats.

    The manufacturer specifies that the device has low power consumption and light weight, which make it suitable for mobile applications.

  • Sherlock

    Integrated Biometrics Sherlock

    550.00

    Integrated Biometrics’ Sherlock is a compact dual finger reader intended for integration into custom hardware.

    The scanner is based on proprietary LES (Light Emitting Sensor) technology, which ensures high-quality fingerprint scanning even when dirty, dry or rough fingers are scanned. Dual and single flats, as well as single rolled fingerprint can be captured.

    The manufacturer specifies that the device has IP65 rating, meaning that its internals are completely sealed and protected from dust and water projected from a nozzle.

  • Watson Mini

    Integrated Biometrics Watson Mini

    350.00

    The Watson Mini is a dual fingerprint reader from Integrated Biometrics designed for desktop usage. The scanner has been certified by the FBI as Appendix F FAP 45 and PIV compliant.

    Watson Mini is is based on proprietary LES (Light Emitting Sensor) technology, which ensures high-quality fingerprint scanning even when dirty, dry or rough fingers are scanned. Dual and single flats, as well as single rolled fingerprint can be captured.

    The manufacturer specifies that the device has IP65 rating, meaning that its internals are completely sealed and protected from dust and water projected from a nozzle.

  • V300 module

    Lumidigm V300 module

    440.00

    The V300 series fingerprint sensors from Lumidigm are based on company’s patented multispectral imaging technology. The technology allows to scan both finger’s surface and subsurface tissues thus allowing to capture high quality fingerprint images even from problematic fingers like wet, dry, dirty or affected by age and/or environment related changes.

    The multispectral imaging technology also allows to reject fake or spoof fingers by capturing detailed surface and deep tissue data.

    The sensors can be integrated to various devices as they use USB or RS-232 connection interfaces.

  • V302 with IP65 shell

    Lumidigm V302 with IP65 shell

    500.00

    This fingerprint scanner is made of a Lumidigm V300 series sensor in a metallic case that is IP65 compliant.

    The scanner uses Lumidigm patented multispectral imaging technology that allows to scan both finger’s surface and subsurface tissues. High quality fingerprint images can be captured even from problematic fingers like wet, dry, dirty or affected by age and/or environment related changes.

    The multispectral imaging technology also allows to reject fake or spoof fingers by capturing detailed surface and deep tissue data.

  • MARS 02

    NeuBio MARS 02

    39.00

    The MARS 02 from NeuBio Technology is an optical fingerprint reader.

    The manufacturer specifies that the scanner features the most compact optical fingerprint sensor on the market. Also specified is scratch-free, solid surface which make the device suitable for heavy duty usage in various applications.

  • Hamster IV

    SecuGen Hamster IV

    80.00

    SecuGen Hamster IV is an FBI FIPS 201 / PIV compliant optical fingerprint scanner with USB 2.0 connection. The scanner is based on a rugged and advanced optical sensor using patented SEIR fingerprint biometric technology.

    SecuGen iD-USB SC/PIV is based on the same fingerprint sensor. It features fingerprint scanner and smart card reader in one device.

  • Hamster Plus

    SecuGen Hamster Plus

    70.00

    SecuGen Hamster Plus is an USB 2.0 optical fingerprint scanner. The Hamster Plus is based on a rugged and advanced optical sensor using patented SEIR fingerprint biometric technology.

    SecuGen iD-USB SC is based on the same fingerprint sensor. It features fingerprint scanner and smart card reader in one device.

  • Hamster Pro

    SecuGen Hamster Pro

    45.00

    SecuGen Hamster Pro is a compact single fingerprint reader intended for projects, which need basic fingerprint scanning functionality for a reasonable price.

    According to the manufacturer, the scanner is based on durable fingerprint sensor, which is impact-proof and resistant to scratches and other stresses. The sensor works well with dry, aged or scarred fingerprints.

  • Hamster Pro 20

    SecuGen Hamster Pro 20

    80.00

    SecuGen Hamster Pro 20 is a compact optical fingerprint reader which captures single flat fingers. The scanner is compliant with FIPS 201 / PIV (FIPS-201) and Mobile ID FAP20 requirements.

    According to the manufacturer, Hamster Pro 20 is able to reject spoof fingerprint images and latent fingerprints, thus preventing certain types of fraud like using photocopied fingerprints. The scanner works well with dry, aged or scarred fingerprints.

  • iD-USB SC

    SecuGen iD-USB SC

    110.00

    iD-USB SC from SecuGen is an USB device that combines fingerprint scanner and smart card reader.

    The fingerprint scanner uses the same sensor as SecuGen’s Hamster Plus. The optical sensor features automatic finger placement detection that is used for enabling fingerprint scanning.

    The embedded smart card reader is based on HID OMNIKEY 3121 hardware. It is compliant with ISO7816 and EMV 2000 level 1 standards. 5V, 3V and 1.8V smart cards are accepted. The reader supports PC/SC and PC/SC-based APIs.

  • iD-USB SC/PIV

    SecuGen iD-USB SC/PIV

    170.00

    iD-USB SC/PIV from SecuGen is an USB device that combines fingerprint scanner and smart card reader. The device is certified by FBI as PIV-071006 (FIPS-201) compliant fingerprint reader.

    The fingerprint scanner uses the same PIV-certified sensor as SecuGen’s Hamster IV. The optical sensor features automatic finger placement detection that is used for enabling fingerprint scanning.

    The embedded smart card reader is based on HID OMNIKEY 3121 hardware. It is compliant with ISO7816 and EMV 2000 level 1 standards. 5V, 3V and 1.8V smart cards are accepted. The reader supports PC/SC and PC/SC-based APIs.

  • SMUFS BT

    SMUFS BT

    255.00

    SMUFS BT is a bluetooth fingerprint reader with capacitive sensor for capturing flat fingerprints.

    The manufacturer specified that SMUFS BT is based on UPEK TCS1 fingerprint sensor, which is certified by the FBI as PIV/FIPS 201 compliant.

    The fingerprint reader is powered by a Li-ion rechargeable battery. The battery is removable, thus the device can be used in the field for longer periods of time.

  • BioMini Combo

    Suprema BioMini Combo

    100.00

    Suprema BioMini Combo is a device that contains optical fingerprint scanner and smart card reader.

    The fingerprint scanner is based on a fingerprint sensor, which was certified by the FBI as FIPS-201 / PIV-071006 compliant. The manufacturer specifies that the sensor is able to reject fake or spoof fingerprints and works well even under direct sunlight.

    The device also contains embedded contact smart card reader. The smart card reader accepts ISO 7816 and EMV 2000 smart cards. 5V, 3V and 1.8V cards are supported. The specified transmission rate is from 2 to 500 kbps.

  • BioMini

    Suprema BioMini Plus 2

    79.00

    Suprema BioMini Plus 2 has been designed to provide high level security solution with its proven reliability of FBI-PIV & STQC certifications. BioMini Plus 2 features industry’s most advanced MDR(multi dynamic range) technology to capture exceptional image quality even under extreme lighting conditions (operates under direct sunlight up to 100,000 LUX).

    The scanner also features cutting-edge live fingerprint detection (LFD) technology for improved security against spoofing, and the latest version of multi award-winning Suprema algorithm for better performance.

  • BioMini Slim 2

    Suprema BioMini Slim 2

    75.00

    Suprema BioMini Slim 2 is a compact single finger reader. The reader is certified by the FBI as PIV (FIPS-201) and Mobile ID FAP20 compliant.

    The manufacturer specifies that BioMini Slim 2 includes live finger detection that allows to reject fake or spoof fingerprints.

    The fingerprint sensor surface has IP65-rated protection level, meaning that its internals are completely sealed and protected from dust and water projected from a nozzle.

    The device has ultra-slim form-factor, which provides flexibility for its usage scenarios.

  • RealScan-D

    Suprema RealScan-D

    400.00

    The RealScan-D from Suprema is an optical live fingerprint reader. The device is certified by FBI as suitable for civil and forensic AFIS.

    RealScan-D features fingerprint sensor with large platen that allows to scan two flat fingerprints simultaneously, as well as single rolled or flat fingerprints.

    The manufacturer specifies that the scanner provides high quality capture for wet and dry fingers. Scanner’s design allows to use it in kiosk applications.

  • RealScan-G1

    Suprema RealScan-G1

    280.00

    Suprema RealScan-G1 is a PIV-certified single fingerprint reader. The scanner is designed for using in high traffic enrollment and identification applications.

    The manufacturer specifies that the RealScan-G1 includes Life Finger Detection hardware which prevents the usage of spoof fingerprints.

    Scanner’s compact design is making it suitable for using in desktop systems, mobile kits, as well as embedding it into kiosks. The specified IP54 casing means the device is protected from dust and water splashes. The rugged casing and the scratch-resistant optical sensor makes the scanner suitable for heavy usage scenario like capturing biometric data in the field.

  • RealScan-G10

    Suprema RealScan-G10

    1,695.00

    Suprema RealScan-G10 is a compact live fingerprint reader that is able to capture flat and rolled fingerprints.

    The RealScan-G10 is certified by the FBI as IAFIS IQS Appendix F compliant fingerprint scanner. The device is also compliant to IDENT, US-VISIT and DHS requirements.

    The scanner is able to capture plain ten-prints using four-finger slaps and dual-thumbs capture. Single flat and rolled fingerprints capture is also supported.