Single finger capture

Filter products Showing all 38 results
Categories
Manufacturers
Order By
Card reader
  • BM5510

    Aratek BM5510

    350.00

    Aratek’s BM5510 is a hand-held smart terminal for mobile fingerprints and faces capture.

    The device is equipped with an optical fingerprint reader for scanning single fingers and 5 MP rear camera for face or barcode capture.

    According to the manufacturer, the device has wireless communication support, which includes 2G/3G networks, Wi-Fi and Bluetooth, as well as GPS navigation. The manufacturer also specifies that the terminal has IP54 dustproof and waterproof casing.

    BM5510 is provided with pre-installed Android OS and allows to run custom applications.

  • BM7500

    Aratek BM7500

    400.00

    Aratek’s BM7500 is a hand-held smart terminal for mobile fingerprints and faces capture.

    The device is equipped with an optical fingerprint reader for scanning single fingers, 2 MP front camera and 8 MP rear camera for face or barcode capture.

    According to the manufacturer, the device has wireless communication support, which includes 2G/3G networks, Wi-Fi and Bluetooth, as well as GPS navigation. The manufacturer also specifies that the terminal has IP54 dustproof and waterproof casing.

    BM7500 is provided with pre-installed Android OS and allows to run custom applications.

  • Credence Two

    Credence ID CredenceTWO

    1,150.00

    CredenceTWO™ features the most advanced enrollment quality fingerprint sensor combined with state of the art smart card reading, paired with a 5-inch HD display running Android 7.1 (Nougat).

    The platform features the award-winning Credence single board computer (SBC), an integrated FAP 30 FBI PIV certified fingerprint sensor, a 5 MP optical camera with dual LED illumination for barcode and QR code reading.

  • Credence Trident

    Credence ID Trident

    2,250.00

    Credence ID’s Trident is a hand-held device, which is capable to capture single or dual fingerprints, face images and single or dual iris images.

    According to the manufacturer, the device is based on a FIPS-201 / PIV and Appendix F Mobile ID FAP 45 certified certified fingerprint sensor.

    The Trident device is provided with pre-installed Android OS and allows to run custom applications. The device features high capacity battery and supports multiple wireless connectivity options.

  • Dermalog ZF1

    Dermalog ZF1

    250.00

    The ZF1 captures fingerprints for ePassports, ID cards and can be used for enrollment, authentication, and identification in governmental, commercial and industrial environments. Its variety of application sectors makes the ZF1 scanner the everyday solution for biometric business.

  • EikonTouch 510

    DigitalPersona EikonTouch 510

    75.00

    EikonTouch 510 from DigitalPersona is a capacitive fingerprint reader. The reader is based on TCS1C fingerprint sensor.

    The manufacturer specifies that the device has SteelCoat coating, which can withstand more than 4 million touches. Also specified the rugged IP63 – rated casing, meaning that the device is sealed from contact with dust and withstands spraying water.

  • EikonTouch 710

    DigitalPersona EikonTouch 710

    95.00

    EikonTouch 710 from DigitalPersona is a PIV (FIPS 201) certified fingerprint reader, based on TCS1C capacitive sensor.

    The manufacturer specifies that the device has SteelCoat coating, which can withstand more than 2 million touches. Also specified the rugged IP63-rated casing, meaning that the device is sealed from contact with dust and withstands spraying water.

  • U.are.U 4500

    DigitalPersona U.are.U 4500

    79.00

    The DigitalPersona U.are.U 4500 Fingerprint Reader is an optical USB 2.0 fingerprint scanner suitable for most users in common or shared computer environments. The reader is easy to install and use. U.are.U 4500 accommodates the widest range of fingerprint and skin conditions.

    An OEM module version is also available.

  • U.are.U 4500 OEM Module

    DigitalPersona U.are.U 4500 OEM Module

    79.00

    The U.are.U 4500 Module is intended for integration into devices like PC keyboards, POS terminals or kiosks, entry and/or attendance control devices, etc. Technically the module is an OEM version of optical U.are.U 4500 fingerprint reader without metal case.

    The module is sealed from dust and designed to be easily mounted into various hardware. U.are.U 4500 module is available in standard and small footprint form factors.

  • Digital Persona U.are.U 5300

    DigitalPersona U.are.U 5300

    120.00

    The U.are.U 5300 is a FIPS-201/PIV certified fingerprint reader from DigitalPersona. The scanner is also certified as compliant to FBI Mobile FAP 30 standard. It is also available as a fingerprint scanner module for OEM integration.

    The manufacturer specifies that the scanner’s fingerprint sensor has an IP64-rated seal between the top case and glass surface. The scanner is able to reject latent or spoof fingerprints.

  • FS10

    Futronic FS10

    99.00

    Futronic FS10 is a PIV-certified fingeprint reader. Scanner features large 1″ x 1″ platen which makes it suitable for AFIS applications.

    FS10 is certified by the FBI as compliant with PIV-071006 Image Quality Specifications. The reader is also listed in US GSA FIPS 201 Approved Product List, which enables it to be used in government systems and applications.

    The scanner uses infra-red illumination for single flat fingerprints capture.

  • FS26

    Futronic FS26

    123.00

    Futronic’s FS26 USB2.0 Fingerprint Mifare Card Reader/Writer combines a fingerprint scanner and an ISO14443A compatible MIFARE card reader/writer into one device.

    Live Finger Detection (LFD) is built in into FS26. The LFD allows to reject fake fingers made from silicone rubber, play-doh or other materials.

    The fingerprint and MIFARE card readers can be used together for two-factor authentication. A fingerprint template is stored on the card and can be compared with a fingerprint scanned with the fingerprint scanner. Also the fingerprint reader and MIFARE card reader can be used separately.

  • FS28

    Futronic FS28

    292.00

    Futronic FS28 is an autonomous fingerprint scanner. The scanner uses Bluetooth interface for connecting with a host device, like PC, tablet or smart phone. FS28 can also be connected to the host via USB port.

    FS28 fingerprint reader was certified by the FBI as PIV-071006 / FIPS-201 compliant, making it suitable for using in U.S. government systems. It can be also used for various applications like field usage by law enforcement officers, attendance check in remote locations etc.

    The device features a built-in LCD screen with 128 x 64 pixel resolution. There are also four buttons for operating the device. The device can report its status via red/blue LED or buzzer.

  • FS80H

    Futronic FS80H

    60.00

    Futronic’s FS80H USB 2.0 Fingerprint Scanner is based on CMOS sensor technology and precise optical system that allow to capture high quality fingerprint images almost without distortions.

    Problematic fingerprints (wet, dry or blurred) can be reliably scanned with FS80H as it uses infra-red LEDs for finger illumination. Image quality optimization is obtained by automatical adjustment of illumination intensity for each finger.

    Live Finger Detection (LFD) is performed by a separate electronic circuit build into FS80H. This feature allows to reject fake fingers made from silicone rubber, play-doh or other materials. The LFD can be optionally enabled from user application.

  • FS81 OEM module

    Futronic FS81 OEM module

    60.00

    Futronic FS81 is an OEM module version of FS80 fingerprint scanner. The module includes a CMOS sensor with precise optical system for fingerprint capture. The optical system allows to capture fingerprint images without any distortions.

    Problematic fingerprints (wet, dry or blurred) can be reliably scanned with the module as it uses infra-red LEDs for finger illumination. Image quality optimization is obtained by automatical adjustment of illumination intensity for each finger.

    FS81 module has rugged sensor with a crown glass scanning window (14 mm thickness).

  • FS82

    Futronic FS82HC

    83.00

    Futronic’s FS82 USB 2.0 Fingerprint Smart Card Scanner is a combination of FS80H fingerprint scanner hardware and ISO7816 smart card reader.

    The fingerprint and smart card readers can be used together for two-factor authentication. A fingerprint template is stored on smart card and can be compared with a fingerprint scanned with the fingerprint scanner. Also the fingerprint reader and smartcard reader can be used separately.

    The fingerprint reader part features precise optics and infra-red illumination that allow to scan wet, dry, blurred and other problematic fingerprints reliably.

  • FS83 module (sFAM)

    Futronic FS83C module (sFAM)

    87.00

    Futronic FS83 serial Fingerprint Authentication Module (sFAM) is suitable for using as a remote scanner or as an embedded module.

    The module can be embedded into access control device, point of sales machine, electronic safe or other similar device. 4 wires serial interface allows to control the module from any host computer. The manufacturer specifies that the module itself is also able to store and recognize fingerprint templates thus it can be used as an embedded fingerprint recognition device.

    Note, that power adapter or power supply are not included with sFAM.

  • FS84 module (eFAM)

    Futronic FS84C module (eFAM)

    103.00

    Futronic FS84 ethernet Fingerprint Authentication Module (eFAM) is suitable for using as a remote scanner or as an embedded module.

    The module can be controlled by any host system via Ethernet (TCP/IP). 4 wires serial interface is also available. The manufacturer specifies that the module itself is also able to store and recognize fingerprint templates thus it can be used as an embedded fingerprint recognition device.

    The module is able to control an external relay via an output channel. Also it can read information via 2 input channels from external sources like door sensor or switch.

  • FS88H

    Futronic FS88H

    80.00

    Futronic’s FS88H is an enhanced version of FS80H fingerprint scanner. The FS88H was certified by FBI to be compliant with PIV-071006 Image Quality Specification for Single Finger Reader. The scanner is also listed in the US General Services Administration (GSA) FIPS 201 Evaluation Program Approved Product List. The FS88H meets the US Federal Information Processing Standard 201 (FIPS 201) for Personal Identification Verification (PIV) of Federal Employees and Contractors.

    The scanner is suitable for high-traffic applications like border control, identity card, driver license, election or any other type of civilian AFIS, as it is able to capture high quality fingerprint images almost without distortions and has a rugged sensor.

  • FS89 OEM module

    Futronic FS89 OEM module

    80.00

    Technically the FS88 module is an FS88H scanner without plastic case and USB cable. The module is intended for customers who want to integrate FS88 into their own products, like handheld POS devices or portable voter registration stations.

    The FS88 scanner is FIPS 201 / PIV compliant device and is listed in the US General Services Administration (GSA) FIPS 201 Evaluation Program Approved Product List. The FS88 sensor is rugged enough to be used in mobile solutions that may require heavy user interaction in various environments.

  • DactyID 20

    Green Bit DactyID 20

    80.00

    DactyID20 from Green Bit is a FAP ID 20 PIV-certified single fingerprint reader. The manufacturer specifies that the scanner features hardware-based fake finger detection. Also specified that the device has IP54 rating An OEM module is also available from the manufacturer.

  • DactyScan 26i