-
Futronic FS26
€123.00Futronic’s FS26 USB2.0 Fingerprint Mifare Card Reader/Writer combines a fingerprint scanner and an ISO14443A compatible MIFARE card reader/writer into one device.
Live Finger Detection (LFD) is built in into FS26. The LFD allows to reject fake fingers made from silicone rubber, play-doh or other materials.
The fingerprint and MIFARE card readers can be used together for two-factor authentication. A fingerprint template is stored on the card and can be compared with a fingerprint scanned with the fingerprint scanner. Also the fingerprint reader and MIFARE card reader can be used separately.
-
Futronic FS80H
€60.00Futronic’s FS80H USB 2.0 Fingerprint Scanner is based on CMOS sensor technology and precise optical system that allow to capture high quality fingerprint images almost without distortions.
Problematic fingerprints (wet, dry or blurred) can be reliably scanned with FS80H as it uses infra-red LEDs for finger illumination. Image quality optimization is obtained by automatical adjustment of illumination intensity for each finger.
Live Finger Detection (LFD) is performed by a separate electronic circuit build into FS80H. This feature allows to reject fake fingers made from silicone rubber, play-doh or other materials. The LFD can be optionally enabled from user application.
-
Futronic FS88H
€80.00Futronic’s FS88H is an enhanced version of FS80H fingerprint scanner. The FS88H was certified by FBI to be compliant with PIV-071006 Image Quality Specification for Single Finger Reader. The scanner is also listed in the US General Services Administration (GSA) FIPS 201 Evaluation Program Approved Product List. The FS88H meets the US Federal Information Processing Standard 201 (FIPS 201) for Personal Identification Verification (PIV) of Federal Employees and Contractors.
The scanner is suitable for high-traffic applications like border control, identity card, driver license, election or any other type of civilian AFIS, as it is able to capture high quality fingerprint images almost without distortions and has a rugged sensor.
-
Futronic FS89 OEM module
€80.00Technically the FS88 module is an FS88H scanner without plastic case and USB cable. The module is intended for customers who want to integrate FS88 into their own products, like handheld POS devices or portable voter registration stations.
The FS88 scanner is FIPS 201 / PIV compliant device and is listed in the US General Services Administration (GSA) FIPS 201 Evaluation Program Approved Product List. The FS88 sensor is rugged enough to be used in mobile solutions that may require heavy user interaction in various environments.
-
Green Bit DactyID 20
€80.00DactyID20 from Green Bit is a FAP ID 20 PIV-certified single fingerprint reader. The manufacturer specifies that the scanner features hardware-based fake finger detection. Also specified that the device has IP54 rating An OEM module is also available from the manufacturer.
-
Integrated Biometrics Columbo
€150.00Integrated Biometrics’ Columbo is a single fingerprint reader designed for desktop applications. It is certified as PIV / FIPS 201 and FBI Appendix F FAP 30 compliant fingerprint scanner.
The scanner is based on proprietary LES (Light Emitting Sensor) technology, which ensures high-quality fingerprint scanning even when dirty, dry or rough fingers are scanned.
The manufacturer specifies that the device has IP54 Ingress protection, meaning that it is protected from dust and splashing water.
-
Integrated Biometrics Curve
€93.00Integrated Biometrics Curve fingerprint reader is based on a proprietary LES Film imaging technology.
The LES (Light Emitting Sensor) technology is based on multi-layer fingerprint scanning. Sensor’s external layers read a finger. A luminescent layer then produces a preliminary fingerprint image that is scanned by an optical sensor. The resulting image has high quality even when dirty, dry or rough fingers are scanned.
-
Integrated Biometrics Kojak
€1,400.00The Kojak is a compact ten-finger biometric scanner which is manufactured by Integrated Biometrics.
The reader is based on proprietary LES (Light Emitting Sensor) technology, which ensures high-quality fingerprint scanning even when dirty, dry or rough fingers are scanned. The large platen allows to capture four-print slaps, dual thumbs and single flats. Also, the scanner can capture rolled fingerprints.
The manufacturer specifies that the device has low power consumption and light weight, which make it suitable for mobile applications.
-
Integrated Biometrics Kojak PL
€950.00The Kojak is a compact ten-finger biometric scanner which is manufactured by Integrated Biometrics.
The reader is based on proprietary LES (Light Emitting Sensor) technology, which ensures high-quality fingerprint scanning even when dirty, dry or rough fingers are scanned. The large platen allows to capture four-print slaps, dual thumbs and single flats.
The manufacturer specifies that the device has low power consumption and light weight, which make it suitable for mobile applications.
-
Integrated Biometrics Sherlock
€450.00Integrated Biometrics’ Sherlock is a compact dual finger reader intended for integration into custom hardware.
The scanner is based on proprietary LES (Light Emitting Sensor) technology, which ensures high-quality fingerprint scanning even when dirty, dry or rough fingers are scanned. Dual and single flats, as well as single rolled fingerprint can be captured.
The manufacturer specifies that the device has IP65 rating, meaning that its internals are completely sealed and protected from dust and water projected from a nozzle.
-
Integrated Biometrics Watson Mini
€350.00The Watson Mini is a dual fingerprint reader from Integrated Biometrics designed for desktop usage. The scanner has been certified by the FBI as Appendix F FAP 45 and PIV compliant.
Watson Mini is is based on proprietary LES (Light Emitting Sensor) technology, which ensures high-quality fingerprint scanning even when dirty, dry or rough fingers are scanned. Dual and single flats, as well as single rolled fingerprint can be captured.
The manufacturer specifies that the device has IP65 rating, meaning that its internals are completely sealed and protected from dust and water projected from a nozzle.
-
Lumidigm V300 module
€450.00The V300 series fingerprint sensors from Lumidigm are based on company’s patented multispectral imaging technology. The technology allows to scan both finger’s surface and subsurface tissues thus allowing to capture high quality fingerprint images even from problematic fingers like wet, dry, dirty or affected by age and/or environment related changes.
The multispectral imaging technology also allows to reject fake or spoof fingers by capturing detailed surface and deep tissue data.
The sensors can be integrated to various devices as they use USB or RS-232 connection interfaces.
-
Lumidigm V302 with IP65 shell
€470.00This fingerprint scanner is made of a Lumidigm V300 series sensor in a metallic case that is IP65 compliant.
The scanner uses Lumidigm patented multispectral imaging technology that allows to scan both finger’s surface and subsurface tissues. High quality fingerprint images can be captured even from problematic fingers like wet, dry, dirty or affected by age and/or environment related changes.
The multispectral imaging technology also allows to reject fake or spoof fingers by capturing detailed surface and deep tissue data.